TOOLS REQUIRED FOR BUFFER KIT
Basic Buffer Kit
Soldering iron and Solder
Large pliers for tightening the nut on the fuseholder
Small needle nose pliers
Small wire cutters
9/16" or 14 mm wrench for rotary switches
7/16" or 10 mm wrench for volume control
#1 phillips screwdriver
Wire strippers of some sort
REMOTE VOLUME CONTROL
Soldering iron and Solder
Small neddle nose pliers
Wire cutters
#1 phillips screwdriver to install the pc board into the housing
5/64" allen wrench for housing screws
Super glue for installing the insert onto the housing
CHASSIS
#1 phillips screwdriver for 8 case screws
5/32" allen wrench for attaching the feet
KNOBS
1/8" allen wrench for tightening the setscrews in the knobs
RCA BOARD INSTRUCTION
SELECTION SWITCH
CONNECTING RCA BOARD & SELECTION SWITCH
POWER SWITCH
NEUTRIK PWR CONNECTOR
NEUTRIK PWR CORD
MODULES
REMOTE CONTROL RECEIVER
DIAGRAMS
DIY BUFFER - RCA TEMPLATE
NEUTRIK POWERCON
NEUTRIK ASSEMBLY INSTRUCTION
GROUNG BUSS
